ENG 103 Fluid Mechanics
Final Exam (12/5/2022)
Section I. Concept Problems [25%] 流体力学代写
1.[5 points] Explain the difference between Navier-Stokes equation and Euler equation in the linear momentum.
2.[5 points] Explain why the experiment in a compressible flow is much more difficult than that in an incompressible flow. Consider the similarity law between a model and a prototype.
3.[5 points] Explain the benefits of neglecting the entrance effect in a pipe flow.
4.[5 points] In a wall-bounded turbulent flow, there are a laminar shear stress and a turbulent shear stress. In the boundary layer, there are three different regions: a viscous wall layer, an overlap layer, and an outer layer. Discuss the dominant shear stress in each region.
5.[5 points] Write down Prandtl’s major contribution to fluid mechanics.
Section II. Equation Problems [75%] 流体力学代写
Problem 1. [25%] Oil, of density 𝜌 and viscosity 𝜇, drains steadily down the side of a vertical plate. The oil film is assumed to become independent of z and have a constant thickness 𝛿. Assume that the velocity in the z axis is 𝑤 = 𝑤(𝑥) only and that the atmosphere offers no shear resistance to the surface of the film at 𝑥 = 𝛿. Do not consider the pressure difference in the z axis.
Problem 2. [25%] The reservoirs contain water at 20°C. If the pipe is smooth with L=4500 m and d=4 cm, what will the flow rate in m³ /h be for Δz=100m?
Problem 3. [25%] Air at 20°C and 1 atm flows at 3 m/s past a sharp flat plate 2 m wide and 1 m long.
(a) What is the wall shear stress at the end of the plate? (10 points)
(b) What is the air velocity at a point 4.5 mm normal to the end of the plate? (5 points)
(c) What is the total friction drag on the plate? (5 points)
Use the following Blasius velocity profile table.
更多代写：cs北美留学生作业代写 槍手代考 英国生物学代写 北美留学生assignment写作 北美ASTR代写 会计r语言作业代写
